Coral Seas Green Aid Green To Clean Pool Clarifier & Algae Oxidizer — 2 lb Concentrate, Non‑Toxic

Coral Seas Green Aid Green To Clean 2 lbs. is a concentrated, non-toxic treatment that clears non-living organic algae and prepares pool water for effective chlorine shocking.

When a pool turns green, mustard, brown or pink from non-living organic debris, you need a targeted oxidizer that works with standard chlorine products. Coral Seas Green Aid Green To Clean is formulated to remove the organic film and dead algae that block chlorine’s action, making subsequent chlorine shock treatments more effective and helping restore water clarity.

How do I use Green To Clean to clear a green pool?

Treating a 15,000-gallon pool is straightforward: apply 2 pounds of product per 15,000 gallons, distribute half along the pool perimeter and concentrate the rest on problem spots. Wait briefly, then begin a regimen of chlorine shock to finish the job.

• Dosage: 2 lbs per 15,000 gallons.
• Application: Spread half around the pool edge; apply remainder to visible algae areas.
• Wait time: Allow about 5 minutes before starting chlorine shock treatment.

What chlorine schedule should I follow after using it?

After the initial Green To Clean application, use 2 lbs of calcium hypochlorite shock around the perimeter every 12 hours for 36 hours, for a total of three shock doses. This sequential approach clears organic load and then oxidizes remaining algae and contaminants.

• Shock product: Cal-hypo (calcium hypochlorite).
• Frequency: Every 12 hours for 36 hours (3 total doses).
• Placement: Broadcast shock around the perimeter for even distribution.

Will this product damage my pool or conflict with chlorine?

Green To Clean is compatible with all types of chlorine and chlorine-based shock treatments and is formulated as a non-toxic natural cleaner. It does not replace sanitizer but enhances the effectiveness of chlorine by removing organic barriers.

• Compatibility: Safe to use with chlorine, bromine, and standard shock chemicals.
• Safety: Non-toxic formulation for treating organic algae residues.
• Follow-up: Clean filter and rebalance water after treatment completes.

How many treatments will I need and what maintenance follows?

Some pools clear after one full cycle; heavily contaminated water may require repeat applications. Once the water is clear, backwash or clean the filter thoroughly and rebalance pH, alkalinity and chlorine to normal operating levels.

• Possible repeats: Multiple treatments may be necessary for severe staining or heavy organic load.
• Filter care: Clean or replace filter media after clarity returns.
• Water balance: Test and adjust pH, alkalinity and sanitizer after treatment.

Who is this for: Coral Seas Green Aid Green To Clean 2 lbs. is intended for pool owners and service professionals facing non-living organic algae problems—green, mustard, brown or pink discoloration—who use chlorine-based sanitation. It’s suitable for residential and commercial pools compatible with chlorine treatments, and for anyone who wants a focused pre-treatment to improve shock effectiveness, reduce prolonged cloudy conditions, and minimize repeated shock waste. Always follow label instructions, treat in recommended dosages for your pool volume, and perform filter maintenance and water balancing once the water clears.