Magigoo 3D Printer Adhesive Glue for PLA ABS PETG — 50 mL all-in-one, water-cleanable, odorless

Magigoo MO2016 is a 50 mL, all-in-one 3D printing adhesive formulated to secure first layers for ABS, PLA, PETG, HIPS and TPU while releasing cleanly after cooling.

Consistent first-layer adhesion is the most common challenge in FFF 3D printing — and Magigoo MO2016 addresses that problem with a water-cleanable, odorless formula designed for many filaments and build platforms. The bottle is sized for regular use and delivers reliable stick during printing and an easy magic-style release once the bed cools, reducing failed prints and warping without harsh solvents.

How does Magigoo improve first-layer adhesion?

Magigoo creates an even, temporary bond between the initial filament lines and the build surface so the part stays put while layers accumulate. It’s formulated to tack quickly but not permanently, so parts peel off cleanly after cooling.

• Applies smoothly to active build area for uniform grip.
• Works across common filaments to prevent detachment and edge lift.
• Releases when cooled, reducing part damage during removal.

Which filaments and surfaces are compatible with this adhesive?

MO2016 is engineered to be versatile: suitable for PLA, ABS, PETG, HIPS and flexible TPU, and compatible with most popular print beds. Whether you use glass, PEI, BuildTak, Flex Plate systems or Kapton tape, the product provides dependable adhesion without altering the surface permanently.

• Filaments: PLA, ABS, PETG, HIPS, TPU (flexible filaments supported).
• Build surfaces: glass, PEI, BuildTak, Flex Plate, Kapton and similar.
• No special surface treatments required; water removes residue.

How do I use Magigoo MO2016 for best results?

Simple application is a key benefit: shake, apply a light layer to the active print area, and start printing. For consistent results, wipe or rinse with water after the print cools and avoid over-applying to prevent excess residue.

• Shake bottle, press applicator, spread a thin coating across the intended print area.
• Print as usual; allow bed and part to cool before removal for easy release.
• Clean the surface with water — no strong chemicals needed.

How long does one 50 mL bottle last and is it safe for shared spaces?

A single 50 mL bottle is formulated for many prints and is long-lasting under normal use; the manufacturer reports dozens of uses per bottle depending on application frequency. The formula is non-flammable and odorless, making it appropriate for homes, schools and small workshops.

• Designed for multiple prints; economical for hobby and light professional use.
• Odorless and non-flammable — suitable for indoor environments.
• Water-cleanable for easy maintenance of build plates and tools.

Who is this for? Magigoo MO2016 is aimed at enthusiasts, educators and small-scale professionals who want a reliable, low-fuss way to reduce first-layer failures and warping across a variety of filaments and beds. If you run a desktop FFF printer and need a safe, reusable adhesive that simplifies print removal and cleanup, this 50 mL bottle is a practical addition to your 3D printing toolkit.