Mifaso PD30W Clamp Power Strip with 4 AC Outlets, 30W USB-C PD Fast Charging and Surge Protection

The Mifaso PD30W Desk Clamp Power Strip is a clamp-mount surge protector that converts one wall socket into four widely spaced AC outlets plus two USB-A ports and a 30W USB-C PD charger for fast, tidy charging at your desk.

If you need a compact, tool-free way to expand power at a workstation, gaming desk, or dorm setup, this Mifaso unit adds multiple AC sockets and fast USB charging while keeping cords off your desktop. Its clamp-on design installs without drilling, the 5-foot cord reaches distant outlets, and built-in surge protection helps shield connected devices. The strip’s spacing accommodates bulky adapters and its 30W USB-C PD port delivers higher-power charging for laptops, tablets, and phones when used alone.

How many devices can I charge simultaneously and what ports are available?

You can use up to eight devices at once: four AC outlets, two USB-A ports, one USB-C port with Power Delivery, and an additional USB-C charging channel. When multiple USB ports are used together the strip intelligently distributes power to prevent overdraw.

• 4 AC outlets with 1.9-inch spacing for large adapters
• 2 USB-A quick-charging ports for phones and accessories
• 1 USB-C PD port up to 30W (single-port max)
• Combined USB total adjusts automatically (multi-port max ~18W)

What charging speeds and voltages does the USB-C PD port support?

The USB-C PD port supports Power Delivery across multiple voltage steps to match device needs, giving faster charge rates for compatible tablets and smaller laptops when used alone. If other USB ports are active, the PD port’s output is shared so peak 30W performance is best achieved using only the USB-C1 port.

• Supported outputs: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A
• Maximum single-port output: 30W for quicker device charging
• When many USB ports in use, total USB output is limited (approx. 18W combined)

How does the clamp install and what desk sizes work best?

The clamp-on bracket tightens by hand—no screws or drilling—so you can mount the strip to a desk edge in minutes. Foam pads protect surfaces from scratches, and the clamp works best on edges between 0.5 and 1.96 inches thick; confirm your tabletop thickness before installing.

• Tool-free clamp installation with protective foam pads
• Recommended edge thickness: 0.5"–1.96" (1.3–5.0 cm)
• 5-foot power cord with 45° right-angle plug to save space near walls

What safety features protect my devices and outlets?

The Mifaso strip includes 1080J surge protection to guard against spikes and lightning-related surges, plus an on/off switch that cuts power to connected gear. To maintain protection and safe operation, keep the total connected load below 1875W/15A.

• 1080 joule surge suppression for transient protection
• On/off master switch to quickly disconnect power
• Rated maximum load: 1875W / 15A — avoid exceeding this limit

Who is this for? The Mifaso PD30W clamp power strip is ideal for remote workers, students, gamers, and hobbyists who need more accessible outlets without sacrificing desk space or drilling holes. It suits small desks, standing workstations, and shared study areas where tidy cable management, fast USB-C charging, and multi-device power are priorities rather than industrial-grade power distribution.