Ring 10 ft USB-A to Micro USB Power Cable for Indoor Cam (2nd Gen) — White, Extra-Long Reach for Flexible Mounting

Extra-long 10 ft USB-A to Micro USB power cable designed specifically to power the Ring Indoor Cam (2nd Generation) and give you flexible placement options.

When your Ring Indoor Cam needs more reach than the standard cable provides, this white 10-foot USB-A to Micro USB cable extends the camera's placement possibilities without changing power hardware. It connects directly to the Indoor Cam (2nd Gen) using the same connector type the camera expects, so there’s no need to buy a special adapter. This cable is intended for indoor use and is a simple way to move the camera to high shelves, corners, or ceilings while keeping a tidy, concealed power run.

How does this cable improve camera placement?

The added length gives you roughly 3.5 extra feet compared with many stock cords, making it easier to reach outlets that were previously out of range. With the extra slack you can position the camera for better sightlines or tuck the cable along trim and behind furniture for a cleaner look.

• 10-foot length for longer reach and flexible mounting choices.
• Helps position camera on high shelves, walls, or ceilings.
• Allows neater cable routing behind furnishings and along baseboards.

Will it work with my Ring Indoor Cam?

This cable is made to work plug-and-play with the Ring Indoor Cam (2nd Generation) model. It uses the correct Micro USB connector for that camera, so installation is straightforward: plug into the camera and a compatible USB-A power source. It is not compatible with the original Indoor Cam (1st Generation).

• Compatible: Ring Indoor Cam (2nd Generation) — no adapter required.
• Not compatible: Ring Indoor Cam (1st Generation).
• Use with a USB-A power adapter that meets the camera’s power requirements.

What power setup do I need to use this cable safely?

The cable itself provides the physical connection; you must use a USB-A power adapter that supplies the correct voltage and current for your Indoor Cam (2nd Gen). Many existing wall chargers or USB ports will work, but check the camera’s recommended power specs to avoid underpowering the device. The cable is intended for indoor, dry locations only.

• Use a power adapter that matches the camera’s recommended output.
• Designed for indoor, dry-area use—avoid outdoor or wet locations.
• Inspect connectors for dust or damage before use for reliable power delivery.

How do I install and route the cable neatly?

Installation is simple: plug the Micro USB end into the camera, then route the USB-A end to your power source. For a finished look, run the cable along baseboards, behind furniture, or use adhesive clips to keep it flush with walls. Avoid pinching the cable in doorways and don’t run it under heavy furniture to prevent wear.

• Plug Micro USB into camera, USB-A into compatible adapter or port.
• Use cable clips or trim channels to hide runs along walls or ceilings.
• Avoid tight bends, pinching, and exposure to moisture for longevity.

Who is this for? If you own a Ring Indoor Cam (2nd Generation) and need more reach to place your camera where it records best or looks tidy, this 10 ft USB-A to Micro USB cable is a straightforward, cost-effective upgrade. It’s ideal for renters, homeowners, or anyone mounting their camera on higher surfaces or across a larger room who wants a clean, reliable power connection without changing the camera or buying a new power adapter.