Southwire Romex SIMpull 14/2 NM-B Indoor Cable 50 ft coil — Solid copper with easy-pull jacket

Southwire Romex SIMpull 14/2 with ground is a 50-foot coil of NM-B residential copper cable designed for easier pulling and standard 600V indoor branch-circuit wiring.

This SIMpull™ NM-B cable from Southwire combines a smooth, patented jacket with solid 14 AWG conductors and an insulated ground to serve typical indoor wiring needs. It's built for dry locations in homes, farms, shops and similar buildings where branch circuits for outlets, switches and lighting are required. The cable meets common U.S. residential wiring conventions and is rated for 600 volts with conductor temperature limits applied per code.

What environments is this 14/2 NM-B cable suitable for?

Use this Romex SIMpull cable for indoor, dry location installations only. It is suitable for exposed or concealed runs in non-wet areas such as inside walls, ceilings, attics and standard conduit-free residential routes.

• Rooms, basements, attics, and garages (if dry)
• Branch circuits for outlets, switches and lighting fixtures
• Air voids in dry masonry or tile walls (not for wet or damp spaces)
• Not rated for direct burial or wet locations

How does the SIMpull jacket help during installation?

The patented SIMpull jacket reduces friction and makes the cable easier to feed through studs, joists and conduit entries. Installers often report faster runs and cleaner stripping compared with conventional jackets, reducing installation time on routine residential jobs.

• Smoother surface for easier pulling around bends and through cavities
• Jacket designed for easier stripping and cleaner terminations
• Reduced snagging on framing and staples during runs
• Same conductor layout as standard NM-B for familiar handling

What are the electrical and temperature ratings I should know?

The 14/2 NM-B cable carries solid 14 AWG copper conductors with an insulated ground and a 600-volt jacket rating. Conductor ampacity and allowable temperature follow National Electrical Code limitations, with ampacity evaluated at the 60°C conductor rating where applicable.

• Solid 14 AWG copper conductors with ground
• Voltage rating: 600 volts
• Conductor temperature limit: up to 90°C, ampacity limited per 60°C NEC rules
• Intended for typical residential branch-circuit loads

How should I handle and store this cable before use?

Keep coils indoors in a dry area and avoid prolonged exposure to sunlight or moisture. When pulling, support the coil to prevent kinking, use appropriate staples or clamps, and follow local code for securing and protecting NM-B wiring.

• Store in dry, shaded locations; avoid outdoor exposure
• Uncoil carefully to prevent twists or kinks that damage conductors
• Use proper staples/clamps and maintain required conductor spacing from heat sources
• Follow NEC and local code for securing, terminations, and protection

Who this cable is for: Electricians, experienced DIYers and contractors performing typical residential branch-circuit wiring will find this Southwire Romex SIMpull 14/2 w/g 50-foot coil practical for routine installations. It’s intended for dry indoor applications where a reliable, easy-to-pull NM-B cable is required, and for users who need a standard 14/2 conductor with an insulated ground for outlets, switches and lighting circuits. Avoid using this product in wet locations, underground runs, or where metallic conduit or specialized cable types are required by code.