VANTRUE USB-C Hardwire Kit for Dash Cams — 11.5ft Cable, 5V/2A with ACC & Low-Voltage Cutoffs

The VANTRUE 11.5ft USB-C Hardwire Kit supplies continuous 5V/2A power to compatible Vantrue dash cams by connecting directly to a vehicle fuse box, featuring ACC control and low-voltage cutoffs to protect the battery.

This hardwire kit is built to give your Vantrue dash camera a reliable, always-on power source without relying on the cigarette lighter socket. With an 11.5-foot cable and a USB-C output, it adapts to standard 12–24V electrical systems found in most cars, trucks, buses and SUVs. The unit includes automatic low-voltage protection and ACC sensing so your camera switches into parking mode when the engine is off and resumes normal operation when you start the vehicle.

How does this hardwire kit protect my vehicle battery?

The kit includes dual-stage undervoltage cutoffs tailored to 12V and 24V systems so it will stop supplying power before the vehicle battery becomes critically depleted. That automatic disconnect avoids deep discharge while still allowing extended parking surveillance when safe. You can install it to balance continuous recording needs against preserving starting power.

• 12V systems: cutoff at 11.6V (with a 12V threshold)
• 24V systems: cutoff at 23.2V (with a 24V threshold)
• Automatic reconnection when voltage recovers
• Prevents drain that can leave a vehicle unable to start

Will this work with my Vantrue dash cam and other devices?

This USB-C hardwire kit is designed to be compatible with a wide range of Vantrue models and can also power similar USB-C devices. It’s suitable for dash cams listed by Vantrue and supports accessories like radar detectors and GPS units when their power requirements match the 5V/2A output. Always confirm compatibility and refer to the installation guide or video to ensure correct fitment for your vehicle and device model.

• Directly compatible with Vantrue N5, N5S, N4 ProS, N4S models
• Also supports S1 Pro, S1 Pro MAX, E360, N2X, E1 Pro, E2, E1 Lite
• Can power other USB-C accessories if they require 5V/2A
• Check installation video before purchase for vehicle-specific guidance

How does ACC functionality improve parking surveillance?

The kit senses the vehicle’s accessory (ACC) line so the dash cam knows when the engine is off and automatically switches to parking mode. That prevents wasted recording and reduces unnecessary power use while parked, yet immediately resumes normal operation when the car starts. This behavior helps capture incidents during off-hours without manual switching.

• Instant parking mode activation when ignition is off
• Automatic exit from parking mode when engine starts
• Reduces continuous recording when vehicle is inactive
• Ensures readiness for impact-triggered recording while parked

What should I know about installation and cable length?

The 11.5-foot cable gives flexibility for routing behind trim and reaching the fuse box or battery area without stretching. Installation involves connecting to a suitable fuse or power source and grounding to the vehicle chassis; follow the included instructions or watch the recommended video for a safe setup. If you’re unsure, have a professional electrician or car audio installer complete the wiring.

• 11.5ft cable allows tidy routing behind panels
• Hardwires to fuse box or battery for stable power
• Ground connection and proper fuse tapping required
• Professional installation recommended if inexperienced

Who is this kit for? The VANTRUE 11.5ft USB-C Hardwire Kit suits Vantrue dash cam owners who want uninterrupted recording, dependable parking surveillance, and built-in safeguards against battery drain. It’s especially helpful for fleet vehicles, drivers who park in public areas, or anyone who prefers a permanent, hidden power solution instead of relying on a cigarette-lighter adapter. If you need continuous power with ACC control and automatic low-voltage cutoffs, this kit provides a professional-grade option that integrates with many Vantrue models.